900/2100 MHz Direct-Connect Cellular Dualband Amplifier

The Direct Connection amplifiers must be physically connected to your cell phone or cellular data card with an external antenna adapter. A Direct Connection amplifier does not produce enough gain to drive an inside antenna and give you even a small service range.

The Wilson SignalBoost 900/2100 MHz Direct Connect Amplifier (811901) improves RF coverage in areas with no signal or low signal strength. The unit amplifies both European/Asian 900MHz and 2100MHz GSM and UMTS signals providing up to 3 Watts of output power on the 900MHz band and 2 Watts of output power on the 21000MHz Band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)

The Wilson SignalBoost 900/2100 MHz Direct Connect Amplifier (811901) is designed for use with European and Asian frequencies only. This model requires at least one outside antenna (compatible with European/Asian frequencies only) and cables to connect the antenna to the amplifier. The cable must be long enough to separate the two antennas by a minimum of 40 feet (See Installation Instructions for specific details). NOT COMPATIBLE with N. American frequencies. NOT COMPATIBLE with T-Mobile AWS Frequency.

Key Features:

• Improves voice and data signal quality
• Max 3-watt power on 900MHz and 2-watt power on 2100 MHz
• FCC and IC type accepted
• Improves data communication rates needed for 3G technologies
• Power control logic ensures maximum output power is within cellular network standards
• Automatic gain control
• Advanced electronics receive and transmit better than a cell phone or cellular data card
• Connects directly to cell phone with a Wilson antenna adapter
• Mobile, marine and in-building use
• Greatly reduces disconnects, drop-outs, and noise
• Transmits signal energy to the outside antenna

Package Contents:

• 811901 Bi-Directional European/Asian Dual-Band (900MHz/ 2100MHz) Amplifier
• 6' Adapter Extension Cable
• 12V DC Power Adapter (Car Charger) - Order A/C adapter separately.

Technical Specifications
Frequency	900MHz (GSM) / 2100MHz (UMTS)   European/Asian Frequencies ONLY. Does not support North American Frequencies.
Max Gain	10dB at 900MHz, 14dB at 2100MHz
Max Output Power	3 Watts
Max RF	+15dBm
Noise Figure	3.5dB nominal
Gain Flatness	+/- 2dB
Port Isolation	90dB
Power Requirements	12V, 0.5-.15A max
Connectors	FME Male, 50Ohms. To connect to N-Male cable order an N-Female/FME-Female connector separately or use another connector to interface your cable type.
Dimensions	5 x 4.3 x 1.4 (inches)
Weight	1.32 lbs