Rfwel :: Remote Site Power :: Power Over Ethernet (POE) :: Din Rail Mounted Industrial 48V Single Power over Ethernet (POE)

Din Rail Mounted Industrial 48V Single Power over Ethernet (POE)

EB-PSE-24V-1 Version: 18-30 VDC Input & Dual 48VDC POE Outputs.

The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use.

Key Features:

EB-PSE-24V-1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
EB-PSE-48V-2 saves you space and money by powering 2 PoE (48 VDC) ports
Industrial rated for any application
Fully IEEE 802.3af compliant PSE (Power Sourcing Equipment) operation

The EB-PSE-24V-1 is Especially suited for solar/pv systems and battery backup applications.

RJ45 PoE pin assignments (A=unused pair; B=signal pair)

A: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
B: TX/V- (3, 6); RX/V+ (1, 2)

PoE operation auto-detection and power management

PoE disconnect mode AC for 24V-1 and DC for 48V-2

PoE protection over-temp, over-current, over/under-voltage and transient

Power Input fully IEEE 802.3af PoE compliant

Power input for 48V-2 models 45-56 VDC @ 31 Watts max.

Power input for 24V-1 models 18-30 VDC @ 20 Watts max.

PoE transient protection 15,000 watts peak

PoE spike protection 5,000 watts (10 times for 10 uS)

Storage temperature range -40 to +85 °C

Humidity (non-condensing) 5 to 95% RH

Vibration, shock and freefall IEC68-2-6, -27 and -32

Electrical safety UL508/CSA C22.2/14 (CUL); EN61010-1

EMC emissions and immunity FCC Part 15 / ICES-003; EN55022/IEC61326-1

Hazardous locations UL1604/CSA C22.2/213 (CUL), C1, D2; ATEX/Cenelec Zone 2

Technical Specifications

POE Output

Fully IEEE 802.3af compliant
IEEE 802.3af PoE operation Power Sourcing Equipment (PSE)
PoE power output 48 VDC @ 15.4 Watts per channel

24V model: Derate 1W per 2°C over 60°C

Environmental

Operating temperature range -40 to +75 °C (cold startup @ -40)

24V model: Derate 1W per 2°C over 60°C

Mechanical

DIN-rail or direct to panel mounting
Packaging material and protection Lexan with IP30 protection
Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
Weight approximate 0.17 Kg (0.25 lbs)
MTBF estimated >1,000,000 hours

Ethernet Performance

Ethernet protocols supported all IEEE 802.3
Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out)
Ethernet port standards 10/100BaseTX IEEE 802.3/802.3u

Quick Links

EB-PSE-24V-1 & EB-PSE-48V-2 datasheet

EB-PSE-24V-1 & EB-PSE-48V-2 user manual

Reference Setup Drawings

Solar/ PV Solutions for Broadband Wireless

Discuss in the Forums (user community input)

Ask a Question

Details

SKU EB-PSE-24V-1

Weight 3.00 lbs

Manuf P/N EB-PSE-24V-1

Availability Contact Store for Availability

Our price: $199.99

Options

Quantity

Related products

#17570

5 POE DIN Rail Mounted Industrial Ethernet Switch

The SL/SLX-5ES is a 5 port industrial Ethernet switches that are industrially hardene and require no user setup (immediately start operating upon powering on). Unmanaged industrial switch. 5 10/100 ports, 4 are PoE. Operating temperature -40 to +85 degrees C. Cold startup at -40 degrees C. Vibration IEC60068-2-6. Humidity 5 to 95% RH. Plastic case.

Our price: $296.50

Amount:

#17580

DIN Rail Mounted 200W 24V to 48V DC-DC Converter

201.6 Watts, 19-36 VDC Input, 48VDC@4.2A Output, DC to DC Switched Converter. Includes DIN Rail mounting hardware.

Our price: $217.80

Amount:

#17581

Din Rail Mounted Industrial 48V Dual Power over Ethernet (POE)

The EB-PSE-48V-2 industrial PoE power injectors adds 48 VDC power into 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. Includes two injectors in one to save space and money. Ultra-rugged, reliable and easy to use.

Our price: $199.99

Amount:

#17551

IP M2M RTU & Data Logger

The IPm2m is an innovative combination of RTU (Remote Terminal Unit), data logger, real-time database client, and telemetry interface in a compact installation-ready package, and features rugged flexible performance. IPm2m gives you a competitive edge...real-time information anytime and anywhere allows you to make fast, cost-effective decisions. IPm2m is the "front-end" that brings real-time data from distributed locations to the Internet or into your central information server.

Our price: $999.98

Amount:

#2010

POE Repeater, Ethernet Extender (POE powered)

OUTREACH doubles, triples or even quadruples the normal 330ft (100m) CAT5 cable run length for 100BaseT networks. It forwards both Ethernet and PoE for another 330ft (100m) using a patent-pending power-processing scheme, and multiple units can be employed in series for even longer distances, with no degradation in network speed or latency.

Our price: $298.89

Amount:

#1962

Power over Ethernet (POE) 48V/0.375A

Eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet. The 802.3af compliant EPE-5818af delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable.

Our price: $39.99

Amount:

Add Checked Items to Cart