Rfwel :: Remote Site Power :: Solar PV Systems :: Kyocera 12 Volt, 135 Watt Solar Module w/ J-Box (2 Modules)

Kyocera 12 Volt, 135 Watt Solar Module w/ J-Box (2 Modules)

The Kyocera KD135SX-UPU is almost identical to the KD135GX-LPU except is has a standard screw terminal junction box instead of the MC4 connector cables. This panel replaces the older KC/KD-125 and 130's. This is the largest solar panel that can ship UPS. this item includes two 135Watt modules allowing for series mounting to yield 24VDC system voltage or parallel mounting to double the charging capacity of a 12V system.

Kyocera's advanced cell processing technology and automated production facilities have produced a multi-crystalline solar cell with an efficiency of over 15%. All modules are constructed using a tempered glass front, EVA pottant and a PVF backing to provide maximum protection from the severest environmental conditions. The excellent efficiency of Kyocera Solar modules translates to both more wattage per square foot and lower mounting structure cost.

The Kyocera KD135SX is one of the few higher power solar panels still available with a junction box, rather than the MC4 cables. The KD series junction box versions all have a ~5" x 5" junction box with screw terminals on the back of the panel for wiring. This is a standard 12 volt panel suitable for almost any environment or application. This panel replaces the older KC-125 and KC-130 panels but has a slightly different and heavier frame size.

New frame technology allows for end mounting under 2400 Pa (50 psf) or wind speeds of 130 mph (ASTM E1830) and traditional mounting under 5400 Pa (113 psf) to support increased snow load.

These cells are encapsulated between a tempered glass cover and a pottant with back sheet to provide efficient protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.

Key Features:

UV stabilized, aesthetically pleasing black anodized frame
Supported by all major mounting structure manufacturers
Easily accessible grounding points on all four corners for fast installation
Proven junction box technology

Package Contents:

QTY=2, 135W, 7.65A, 17.VDC Solar modules. (two 12V modules series-wired allows for a 24V output)
Junxion Box
Need to order dual module side-of-pole mount separately.

Technical Specifications
Electrical Performance Under Standard Test Conditions (irradiance 1000W/m², AM1.5 spectrum, 25^oC cell temp)
Max Power	135W (+/- 5%)
Max Power Voltage	17.7V
Max Power Current	7.63A
Open Circuit Voltage (Voc)	22.1V
Short Circuit Current (Isc)	8.37A
Max System Voltage	600V
Temp Coeff of Voc	-8.00x10^-2 V/^oC
Temp Coeff of Isc	5.02x10^-3 V/^oC
Electrical Performance Under Nominal Operating Conditions (irradiance 800W/m², AM1.5 spectrum, 47.9^oC cell temp)
Max Power	95W
Max Power Voltage	15.7V
Max Power Current	6.10A
Open Circuit Voltage (Voc)	20V
Short Circuit Current (Isc)	6.79A
Operating Conditions
Operating Temperature	-40^oC to 90^oC (based on cell temp)
Max Fuse	15A
Physical
# of Cells per Module	36
# of modules per package	2
Dimensions	59.1" x 26.3" x 1.8" (module), 5.9" x 5.5" x 1.5" (IP65 rated J-Box)
Weight	27.5lbs

Quick Links

Kyocera KD135SX-UPU Datasheet

Kyocera KD135SX-UPU Installation Manual

Solar/ PV Solutions for Broadband Wireless

Remote Wireless Video Surveillance

Discuss in the Forums (user community input)

Sample Setup Drawings

Ask a Question

Details

SKU KD135SX-UPU

Weight 30.00 lbs

Manuf P/N KD135SX-UPU

Availability Contact Sales for Availability

Our price: $1495.00

Options

Quantity

Related products

#1675

30 amp 12/24vdc Solar Charge Controller

These controllers have a long list of standard features, they are available in 15 or 30 amps and 12/24 or 48 VDC. Three types of batteries can be charged, sealed, gel or flooded. Other features include temperature compensated charging, 100% solid state, LED's indicate battery status. The control board is conformal coated. All fasteners are stainless steel. All Prostar have Low voltage Disconnect (LVD), electronic protection against reverse polarity, reverse current at night high voltage disconnect and high temperature disconnect, lightning and transient surge protection.

Our price: $194.99

Amount:

#1676

30 amp 12/24vdc Solar Charge Controller with Meters

Thess controllers have a long list of standard features, they are available in 15 or 30 amps and 12/24 or 48 VDC. Three types of batteries can be charged, sealed, gel or flooded. Other features include temperature compensated charging, 100% solid state, LED's indicate battery status. The control board is conformal coated. All fasteners are stainless steel. All Prostar have Low voltage Disconnect (LVD), electronic protection against reverse polarity, reverse current at night high voltage disconnect and high temperature disconnect, lightning and transient surge protection.

Our price: $279.99

Amount:

#17591

Ajustable Tilt Side-of-Pole Mount for Dual KD135SX Solar Modules

These solar module mounting structures, especially designed for Kyocera Solar Modules are manufactured from high-quality anodized aluminum, providing excellent strength, light weight and corrosion resistance. Choose from fixed or adjustable tilt models.

Our price: $495.00

Amount:

#17557

Pre-packaged 260W, 210AH, 24/48V POE Solar System

This pre-packaged system is well suited for wireless radio sites and other remote systems requiring power and where no other power source is available. This system is designed for 24VDC or 48VDC Power over Ethernet and contains all the components required for power generation. This system is pre-wired and pre-assembled to ease installation. May be used for broadband wireless radios, repeater stations, security & surveillance systems etc.

Our price: $4995.00

Amount:

#17579