Wilson SIGNALBOOST™ Amplifier has been carefully engineered to significantly improve the performance of your cell phone or cellular data card in both vehicle and home/ office applications. Together with an antenna, the amplifier’s state-of-the-art technology is
designed to increase your signal up to 10-15 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies. The universal connector fi ts all cellular and PCS phones and data cards. (Not designed for iDEN/NEXTEL)
The antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then boosted and sent through the extension cable to the universal connector on your cell phone or data card, which then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the universal connector and the extension cable, is boosted by the amplifier and broadcast back to the cell tower through the antenna.
Features
• Works on all generations of CDMA, TDMA and GSM
• Up to 3 watts maximum power
• Power control logic ensures maximum output power is within cellular standards
• FCC and IC type accepted
• US and foreign Patents Pending
Benefits
• Includes everything you need in the box
• Works with all Cellular/PCS cell phones and laptop data cards (except iDEN, Nextel)
• Connects to ALL phones and data cards with a Universal Connector using a removable adhesive backed Velcro® patch
• No plug-in adapter needed
• Up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works great in mobile, in-building, and marine applications
• Easy to install and use, and it's inexpensive
Package Contents
• Wilson SIGNALBOOST Cellular Signal Amplifier
• Cigarette Lighter DC Power Supply
• 4" Mini Magnet-Mount Antenna
• Universal Connector with Extension Cable and a removable adhesive backed Velcro patch
Specifications
|
Frequency |
824-894 MHz / 1850-1990 MHz |
|
Gain |
Cell site controlled |
|
Max Output Power |
3 watts (cell site controlled) |
|
Max RF |
+35 dBm / +33 dBm |
|
Noise Figure |
3.5 dB nominal |
|
Flatness |
± 2 dB / ± 2 dB |
|
Isolation |
> 50 dB |
|
Power Requirements |
120 V DC, 2 A max |
|
Connectors |
FME-Male 50 ohms |
|
Dimensions |
5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm) |
|
|