Rfwel :: Radio Cables, Connectors & Accessories :: Lightning Surge Protector & Misc :: 0-3 GHz 90V Lightning Protector N-Female/ N-Female

Printable version

0-3 GHz 90V Lightning Protector N-Female/ N-Female

Reliable Performance from DC ~ 3 GHz
Bi-Directional Protection
Protector will pass DC
Easily Replaced Gas Tube Element
Multi-Strike Capability

The AL-NFNFB-9 is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. This unit features a N-Female to N-Female Bulkhead connector with a rubber "O"-ring seal for mounting through an enclosure wall or with the included aluminum mounting bracket.

Due to its low cost and superior RF performance, this unit is ideal for IEEE 802.11b and 802.11g Wireless LAN applications, as well as ISM, MMDS, Cellular, and PCS applications. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding.

Specifications

Electrical Specifications

Frequency Range

0 - 3 GHz

Protector Complies With

IEC / IEEE Standard

VSWR

1:1.3 Max (0 - 3 GHz)

Insertion Loss

0.4 dB Max (0 - 3GHz)

Impedance

50 Ohm

Gas Tube Element:
DC Breakdown Voltage Indicated

90 V 20%

Gas Tube Impulse Breakdown Voltage

1000 V 20%

Gas Tube Insulation Resistance

10,000 MΩ

Maximum Withstand Current

5 KA

RF Power Rating

Voltage Rating	DC ~ 30MHz		30-500MHz		500MHz3GHz
Voltage Rating	PEP¹	CW²	PEP¹	CW²	PEP¹	CW²
90 Volt	110W	55W	65W	32W	20W	10W

Mechanical Specifications

Connectors Comply With

MIL-C-71A, 39012 Standard

Connectors Types

N-Female to N-Female Bulkhead

Connector Body Material

Nickel Plated Brass

Body Material

Aluminum

Pin Material

Gold Plated Brass

O-Ring Material

Rubber

Bracket Material

Aluminum

Ground Lug

10 AWG Max.

Dimensions (L x H x W)

3.2 in x 1.6 in x 0.8 in
(82 mm x 40 mm x 20 mm)

Max. Panel Thickness (Bulkhead Connector)

0.312" (7.93 mm) Thick

Weight

3.17oz
(89.8g)

Environmental Specifications

Temperature Range

-67F to 185F
(-55C to +85C)

Dust and Waterproof Rating

IEC 529 / IP65

Moisture Resistance

MIL-STD-202 Method 106D

Salt Fog

MIL-STD-202 101D/B

Temperature Shock

MIL-STD-202 107D/A-1

Vibration

MIL-STD-202 Method 204D/B

Shock

MIL-STD-202 Method 213B/A

RoHS Compliant

Yes

Notes:
1 - Peak Envelope Power (PEP): The average power supplied to the antenna transmission line by a transmitter during one radio frequency cycle at the crest of the modulation envelope taken under normal operating conditions.

2 - Continuous Wave (CW): A wave of constant amplitude and constant frequency.

Details

SKU AL-NFNFB-9

Our price: $24.99