Rfwel :: RF Amplifiers & Repeaters :: Cellular, PCS, iDEN Amplifier :: In-Building Cellular Amplifiers :: 850MHz In-Building Wireless Cellular 65 dB Amplifier (801165)

Printable version

850MHz In-Building Wireless Cellular 65 dB Amplifier (801165)

The Cellular 65 dB amplifier improves signals on the Cellular (824-894 MHz) band and works with all major North American cellular carriers except Nextel/iDEN.

Features

• Works with all cell phones and laptop data cards
• Significantly improves voice and data signal quality
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works with all generations of CDMA, TDMA, GSM and high-speed data technologies
• Improves data communication rates needed for 3G technologies.
• Automatic gain control up to 65 dB
• 2 dB gain step 30-60 dB
• Automatic gain adjusting in the event of oscillation and/or overload
• Gain indicator lights
• Automatic shutdown on overload
• Up to 3-watt power amplifier
• Power control logic ensures maximum output power is within cellular network standards
• Oscillation protection and shutdown auto reset
• FCC and IC type accepted

Frequency Range	824-894 MHz
Amplifier Gain	P/N: 801106 60dB max P/N: 801165 65dB max
Max Output Power	35dBm
Max RF	30dBm (Uplink & Downlink)
Noise Figure	3-4dB typical
Gain Flatness	+/- 2.5dB
Isolation	> 90dB (uplink/ downlink)
Input impedance	50Ω
Size(inches)	5.6"x3.6"x1.7"
Weight	1.5lb
Cable/ Connector	N-Female (cable sold separately)
Power Supply	Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A

NOTE -- need a minimum separation distance of at least 75ft between outdoor antenna and indoor antenna to prevent positive feedback (oscillations). Distance may be relaxed due to barriers between the two or by using a antenna with a very good front-to-back ratio.