The CallFinder CDMA cellular gateway enables small to medium-sized businesses
to take advantage of lower cost wireless networks to provide a substantial
savings in their overall telephone bill. It connects to a PBX trunk line, PBX
extension line, or a single PSTN line and routes incoming and outgoing calls
through a CDMA wireless network. Equipped with both FXS and FXO interfaces, the
gateway offers a wide range of potential applications.
When connected to a PBX or Key Telephone System, it converts an expensive PSTN-to-CDMA
call into a direct mobile-to-mobile call. When connected to an analog telephone,
it can serve as the primary voice network for small remote offices or other
locations that don’t have a fixed line infrastructure. In addition, it can be
used as an alternate route for voice communications in emergency situations.
Benefits
- Toll bypass / toll reduction over wireless network
- Primary voice network or PSTN service backup
- Temporary emergency telephone line
Family Features
- Connects to PBX, Key Telephone System, analog phones or analog phone lines
- Dual-band 800/1900 MHz CDMA
- Qualcomm® MSM6050 chipset
- FXS and FXO interfaces
- U.S. Caller ID reporting
- Line reversal features for disconnect and billing
- Voice features include EVRC, 13kQCELP and AMPS voice
- SMA antenna connector
- Desktop or panel mounting
- Numerous LEDs provide operational status
- AT command compatible
- Small footprint
- CDG 1 and 2 network certified
- Two-year warranty
- Carrier Approved for Sprint & Alltel
Highlights:
Gateway Between CDMA and Landlines.
The CallFinder CDMA cellular gateway connects to a PBX, KTS or analog phone
to route incoming and outgoing calls over a CDMA network. The gateway is
typically connected to an analog CO port (POTS line). The user simply dials the
desired cell phone number and the phone system's routing table will hand off the
call to the port connected to the CallFinder. From here, the CallFinder will
route the call over the wireless network.
Reduce Cellular Telecom Costs.
Cellular mobile costs have grown to account for over one-third of the company
bill for telecommunications. The CallFinder CDMA cellular gateway connects
directly to any business phone system and routes incoming and outgoing calls
over a cellular network allowing companies to take advantage of their free
“in-network” minutes. Not only are cell-to-cell calls free, but this also helps
to reduce the number of pooled minutes needed. In addition, users can route the
call forwarding “follow-me” feature over the cellular network. All of this
collectively adds
up to lower cellular telecom costs.
Primary Voice Network for Remote Locations.
The CallFinder CDMA cellular gateway provides a fast, easy fixed line
alternative for small offices, SOHO environments or other remote locations.
Simply connect an analog phone to the gateway, and the user can make affordable
cellular calls over the CDMA network. There is no need for fixed wiring, making
it an ideal solution to any environment where a fixed line is not readily
available such as mobile centers, or retail kiosks.
Alternate Route / Disaster Planning.
The CallFinder CDMA cellular gateway provides an easy, quick solution
in emergency situations. If PSTN service were to go down, a CDMA gateway
attached to the phone system would allow users to make and receive calls over
the CDMA network, including emergency 911 service. This solution provides
affordable “peace of mind” and helps ensure critical communication in disaster
situations by providing an alternate route for voice communications.
Comprehensive Service and Support.
The Multi-Tech commitment to service means we provide a two-year product
warranty and service that includes free telephone technical support, 24-hour web
site and ftp support.
|
Specifications |
| Voice Features |
EVRC, 13kQCELP, & AMPS voice |
| Antenna Connector |
50 ohm SMA (Female connector) |
| Interface Connector |
(1) RS-232 DB-9 |
| Voice Connectors |
(2) RJ-11 (1 - FXS, 1 - FXO) |
| FXS Interface |
Analog phone or PBX/KTS CO port; loop start |
| FXO Interface |
PBX/KTS station port or CO line; loop start |
| Power Connector |
2.5mm miniature screw |
| Power Requirements |
7V to 12VDC |
| Physical Description |
6" L x 6.4" W x 1.2" H |
| Certifications |
EMC: FCC Part 2, 15 Class A, 22, 24; EN 55022; EN 55024
Safety: cUL, UL 60950; EN 60950
Network: CDG 1 & 2 |
Use ordering codes for specific build options.
| Ordering Information |
| Product- Ordering Codes |
Description |
Region |
| CF100FX2-C |
1-Port CDMA Gateway (FXS/FXO) |
Regional |
| CF100FX2-C-N1 |
Generic, Requires Provisioning (A-key = Random) |
Global |
| CF100FX2-C-N2 |
For Sprint Networks |
USA |
| CF100FX2-C-N9 |
Generic, Requires Provisioning (A-key = 0) |
Global |
| CF100FX2-C-N14 |
Alltel |
USA |
|