The CallFinder GSM cellular gateway enables small to medium sized businesses
to take advantage of lower cost wireless networks to provide a substantial
savings in their overall telephone bill. It connects to a PBX trunk line, PBX
extension line, or a single PSTN line and routes incoming and outgoing calls
through a GSM wireless network. Equipped with both FXS and FXO interfaces, the
cellular gateway offers a wide range of potential applications. When connected
to a PBX or Key Telephone System, it converts an expensive PSTN-to-GSM call into
a direct mobile-to-mobile
call. When connected to an analog telephone, it can serve as the primary voice
network for small remote offices or other locations that don’t have a fixed line
infrastructure. In addition, it can be used as an alternate route for voice
communications in emergency situations.
Features
• Connects to PBX, Key Telephone System, analog phones or analog phone lines
• Quad-band GSM 850/900/1800/1900 MHz
• FXS and FXO interfaces
• U.S. Caller ID reporting
• Line reversal features for disconnect and billing
• Voice features include Half rate (HR), Full rate (FR), Enhanced full rate (EFR)
and Adaptive multi rate (AMR)
• SMA antenna connector
• Desktop or panel mounting
• Numerous LEDs provide operational status
• AT command compatible
• Small footprint
• PTCRB network certified
• Two-year warranty
Highlights:
Gateway Between GSM and Landlines.
The CallFinder GSM cellular gateway connects to a PBX, KTS or analog phone to
route incoming and outgoing calls over the GSM network.
The gateway is typically connected to an analog CO port (POTS line). The user
simply dials the desired cell phone number and the phone system's routing table
will hand off the call to the port connected to the CallFinder. From here, the
CallFinder will route the call over the wireless network.
Reduce Cellular Telecom Costs.
Cellular mobile costs have grown to account for over one-third of the company
bill for telecommunications. The CallFinder GSM cellular gateway
connects directly to any business phone system and routes incoming and outgoing
calls over a cellular network allowing companies to take advantage of their free
“in-network” minutes. Not only are cell-to-cell calls free, but this also helps
to reduce the number of pooled minutes needed. In
addition, users can route the call forwarding “follow-me” feature over the
cellular network. All of this collectively adds up to lower cellular telecom
costs.
Primary Voice Network for Remote Locations.
The CallFinder GSM cellular gateway provides a fast, easy fixed line alternative
for small offices, SOHO environments or other remote locations. Simply connect
an analog phone to the gateway, and the user can make affordable cellular calls
over the GSM network. There is no need for fixed wiring, making it an ideal
solution to any environment where a fixed line is notreadily available such as
mobile centers, or retail kiosks.
Alternate Route / Disaster Planning.
The CallFinder GSM cellular gateway provides an easy, quick solution
in emergency situations. If PSTN service were to go down, a GSM gateway attached
to the phone system would allow users to make and receive calls over the GSM
network, including emergency 911 service. This solution provides affordable
“peace of mind” and helps ensure critical communication in disaster situations
by providing an alternative route for voice communications.
Comprehensive Service and Support.
The Multi-Techcommitment to service means we provide a two-year product
warranty and service that includes free telephone technical support, 24-hour web
site and ftp support.
|
Specifications |
| Voice Features |
Half Rate (HR), Full Rate (FR), Enhanced Full Rate (EFR), &
Adaptive Multi Rate (AMR) |
| Antenna Connector |
50 ohm SMA (Female connector) |
| SIM Connector |
Standard 3V SIM receptable |
| Interface Connector |
(1) RS-232 DB-9 |
| Voice Connectors |
(2) RJ-11 (1 - FXS, 1 - FXO) |
| FXS Interface |
Analog phone or PBX/KTS CO port; loop start |
| FXO Interface |
PBX/KTS station port or CO line; loop start |
| Power Connector |
2.5mm miniature screw |
| Power Requirements |
5V to 32VDC |
| Physical Description |
6" L x 6.4" W x 1.2" H |
| Certifications |
CE Mark, R&TTE
EMC: FCC Part 2, 15 Class A, 22, 24; EN 55022; EN 55024
Safety: cUL, UL 60950; EN 60950
Network: PTCRB |
Use ordering codes for specific build options.
| Ordering Information |
| Product- Ordering Codes |
Description |
Region |
| CF100FX2-G |
1-Port GSM Gateway (FXS/FXO) |
Global |
|