Rfwel :: Remote & Backup Power :: Power Over Ethernet (POE) :: POE Repeater, Ethernet Extender (POE powered)

POE Repeater, Ethernet Extender (POE powered)

POE Repeater, Ethernet Extender (POE powered)

POE Repeater, Ethernet Extender (POE powered)

OUTREACH doubles, triples or even quadruples the normal 330ft (100m) CAT5 cable run length for 100BaseT networks. It forwards both Ethernet and PoE for another 330ft (100m) using a patent-pending power-processing scheme, and multiple units can be employed in series for even longer distances, with no degradation in network speed or latency.

Key Features:

  • OUTREACH itself is powered by a PoE network switch (or PoE injector) and so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras two or three times further than previously possible without going to fibre or installing midspan power sources.
  • OUTREACH is a transparent Layer 1/2 device and requires no MAC or IP address. It introduces virtually no delay and other network devices will be unaware there is anything other than a cable between them. OUTREACH is compatible with both patch and crossover cables.
  • OUTSOURCE is a fully IEEE-compliant single channel POE midspan. It can be used to provide power for any compatible POE powered devices

Technical Specifications:

Power Typical: 1 Watt, Maximum: 2.2 Watts
POE IEEE 802.3af Class 0 device (0 – 13 Watts)
Ethernet 100BASE-TX Full Duplex only
Auto-Negotiation and Auto-Crossover supported
Size(inches) 70x34x20mm / 2.8x1.3x0.8”
100x37x20mm / 3.9x1.5x 0.8” inc. screws and tabs (WxDxH)
Mounting Two 7mm / 0.28” dia holes, 84mm / 3.3” apart
Environmental Operating temperature: -10 to 50°C / 14 to 122°F,
Humidity: 85% non-condensing

 

Quick Links

Detailed Installation Manual

Remote Wireless Video Surveillance

Example setup drawings

Discuss in the Forums (user community input)

Ask a Question

Note that to extend power and ethernet to equipment that is not IEEE 802.3af POE compliant you will need a POE splitter. Contact an RfWeL Wireless Support Specialist for complete network solutions.

Details
SKU VOR-OR01
Weight 2.00 lbs
 
Our price: $298.89
Options
Quantity

Related products

#2011
802.3af POE Splitter for 12V/0.67A Non-POE Devices

802.3af POE Splitter for 12V/0.67A Non-POE Devices



 Power Over Ethernet Active Splitter with Isolation 802.3af , Output 12VDC at 1A 12W. With IEEE 802.3af compatibility and advanced auto-sensing algorithm means it will accept POE power from any IEEE 802.3af router or power supply.

 Our price: $44.95
Amount: 

Add Checked Items to Cart






Click to verify BBB accreditation and to see a BBB report.